Popis produktu:

Key Features

1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 512GB DDR3 1600MHz ECC
    Registered DIMM; 16x DIMM sockets
4. Expansion slots:
    1 PCI-E 3.0 x16 and 6 PCI-E 3.0 x8
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. 8x SAS2 ports from LSI 2208
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. 7x USB 2.0 ports
    (4 rear, 2 via header + 1 Type A)

Product SKUs

MBD-X9DRH-7F -O X9DRH-7F (Standard Retail Pack)
MBD-X9DRH-7F -B X9DRH-7F (Bulk Pack)

Physical Stats

Form Factor Extended ATX
Dimensions 12" x 13" (30.48cm x 33cm)

Processor/Cache

CPU Intel® Xeon® processor E5-2600 (up to 135W TDP **)
Dual Socket R (LGA 2011)
Cache Up to 20MB
System Bus QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity 16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C602 chipset
AHCI SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10
 SATA 3.0 6Gbps with RAID 0, 1
SCU SATA SATA 2.0 3Gbps with RAID 0, 1, 10
SAS SAS2 from LSI 2208 (1GB cache)
HW RAID 0, 1, 5, 6, 10, 50, 60 support
Supports up to 16 drives
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video Matrox G200eW

Input / Output

AHCI SATA 2 SATA 3.0 ports (6Gbps)
4 SATA 2.0 ports (3Gbps)
SCU SATA 4 SATA 2.0 ports (3Gbps)
SAS 8 SAS2 ports (6Gbps)
LAN 2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 7 USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
Video 1 VGA port
Serial Port / Header 2 Fast UART 16550 serial COM port
(1 rear & 1 header)
DOM 1 DOM (Disk on Module) power connector
TPM 1 TPM 1.2 20-pin Header

Chassis ( Optimized for X9DRH-7F )

2U Chassis CSE-825TQ-R740LPB
CSE-826BA-R1K28LPB
CSE-826BA-R920LPB
CSE-826BE16-R1K28LPB
CSE-826BE16-R920LPB
CSE-826BE26-R1K28LPB
CSE-826BE26-R920LPB
3U Chassis CSE-835TQ-R920B
CSE-836BA-R1K28B
CSE-836BE16-R1K28B
CSE-836BE26-R1K28B
Tower / 4U Rackmount CSE-846BA-R1K28B
CSE-846BE16-R1K28B
CSE-846BE26-R1K28B
CSE-847A-R1400B
CSE-847A-R1K28LPB
CSE-847E16-R1400B
CSE-847E16-R1K28LPB
CSE-847E26-R1400B
CSE-847E26-R1K28LPB
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

Expansion Slots

PCI-Express 1 PCI-E 3.0 x16
6 PCI-E 3.0 x8

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI

Management

Software SuperDoctor® III
Watch Dog
NMI
IPMI 1.5 / 2.0
Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN 8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header
RoHS, Halogen Free
Dual Cooling Zones


Operating Environment

Operating Temperature Range 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range 5% - 95% (non-condensing)