Popis produktu:

Key Features

1. Intel® Core™ i7 / i7 Extreme Edition,
   and Intel® Xeon® 5500/3500 series
   processors (QPI up to 6.4 GT/s)
2. Intel® X58 Express Chipset
3. Up to 24GB DDR3 1333, 1066 & 800
   ECC / non-ECC Un-Buffered DIMM
4. Dual Intel® 82574L Gigabit
   Ethernet Controller
5. LSI 1068E 8-Port SAS Controller;
   RAID 0, 1, 10
6. 6x SATA (3.0Gbps) Ports
   RAID 0, 1, 5, 10
7. 3 (x8) PCI-Express 2.0 (1 in x16 slot),
   1 (x4) PCI-Express (using x8 slot),
   2x 32-bit PCI Slots
8. Integrated IPMI 2.0 with Dedicated LAN
9. 8x USB (2 rear, 2 on-board, 2 headers)
Processor/Cache

CPU LGA 1366 Socket
Intel® Core™ i7-965 Extreme Edition
Intel® Core™ i7 series
Intel® Xeon® 5500 series
Intel® Xeon® 3500 series
System Bus QPI (up to 6.4 GT/s)

System Memory

Memory Capacity Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
Three Channel memory bus
6 DIMM sockets
Memory Type 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset Intel® X58 Express chipset
ICH10R
SAS LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
SATA Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA Matrox G200eW 8 MB DDR2
Super I/O Winbond 83627DHG chip
Clock Generator CK505

Input / Output

SAS 8 SAS / SATA ports
Serial ATA 6 SATA ports
6 SATA hard drives supported
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
2x USB on-board
2x USB internal headers (4 ports)
Total 8 USB 2.0 Compliant
VGA 1x VGA port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1x Fast UART 16550 serial port
1x internal header

I/O Panel


• Please see this board's I/O Panel

Chassis ( Optimized for X8ST3-F )

2U Chassis CSE-213A-R900LP
CSE-216A-R900LP
CSE-216E1-R900LP
CSE-216E2-R900LP
CSE-822T-400LP
CSE-825MTQ-R700LPB
CSE-825TQ-560LPV
CSE-825TQ-R700LPV
CSE-826TQ-R800LPV
Important Chassis Notes To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]

Expansion Slots

PCI-Express 3 (x8) PCI-e 2.0 slots (1 using x16 slot)
1 (x4) PCI-e slot (using x8 slot)
PCI 2x 32-bit PCI slot

System BIOS

BIOS Type 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3

Management

Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Super Doctor III
Watch Dog
NMI
Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring

CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of six fan headers supporting up to 6 fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header