Popis produktu:

Key Features

1. Intel® Xeon® processor 5600/5500
   series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 96GB** DDR3 1333/ 1066/
    800MHz ECC Registered DIMM / 24GB
    Unbuffered DIMM
4. Dual Intel® 82574L Gigabit
    Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller
6. 2 (x8) PCI-E 2.0 (1 in x16 slot),
    1 (x4) PCI-E 2.0 (in x8 slot),
    1 (x4) PCI-E (in x8 slot),
    2x PCI 33MHz slots
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN

Product SKUs

MBD-X8DTL-iF -O X8DTL-iF (Standard Retail Pack)
MBD-X8DTL-iF -B X8DTL-iF (Bulk Pack)

Physical Stats

Form Factor ATX
Dimensions 12" x 10" (30.5cm x 25.4cm)

Processor/Cache

CPU Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)
Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
QPI up to 6.4 GT/s

System Memory

Memory Capacity 6x 240-pin DIMM sockets
Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-24D
SATA Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC*
Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Matrox G200eW
Super I/O Winbond® 83627DHG-P chip

Input / Output

Serial ATA Six Serial ATA ports
Six SATA hard drives supported
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB rear ports
1x USB on-board
2x USB internal headers
Total 5 USB 2.0 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)

Chassis ( Optimized for X8DTL-iF )

1U Chassis CSE-111T-560CB
CSE-113MTQ-560CB
CSE-512F-520B
CSE-512F-520LB
CSE-512F-600B
CSE-811L-600B
CSE-811TQ-520B
CSE-811TQ-600B
CSE-813MTQ-350C
CSE-813MTQ-520C
CSE-813MTQ-600CB
2U Chassis CSE-213A-R900LPB
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-216E16-R1200LPB
CSE-216E2-R900LPB
CSE-523L-520B
CSE-823MTQ-R700LPB
CSE-823TQ-650LPB
CSE-825MTQ-R700LPB
CSE-825TQ-560LPB
CSE-825TQ-563LPB
CSE-825TQ-R700LPB
CSE-825TQ-R720LPB
CSE-826A-R1200LPB
CSE-826E1-R800LPB
CSE-826E2-R800LP
CSE-826TQ-R800LPB
3U Chassis CSE-833T-550B
CSE-833T-650B
CSE-833T-R760B
CSE-835TQ-R800B
CSE-835TQ-R920B
CSE-836A-R1200B
CSE-836E1-R800B
CSE-836E2-R800B
CSE-836TQ-R800B
CSE-933E1-R760B
CSE-933E2-R760B
CSE-933T-R760B
CSE-936A-R1200B
CSE-936A-R900B
CSE-936E1-R900
Mid-Tower CSE-733E-465B
CSE-733i-465B
CSE-733T-465B
CSE-733TQ-465B
CSE-733TQ-665B
Tower / 4U Rackmount CSE-743i-R760
CSE-743T-665B
CSE-743T-R760
CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800B
CSE-745TQ-920B
CSE-745TQ-R800B
CSE-846A-R1200B
CSE-846E1-R900B
CSE-846E2-R900
CSE-846TQ-R900B
CSE-847E1-R1400LPB
CSE-847E2-R1400LPB
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots

PCI-Express 2 (x8) PCI-E 2.0 (1 in x16 slot)
1 (x4) PCI-E 2.0 (in x8 slot)
1 (x4) PCI-E (in x8 slot)
PCI 2x 33MHz PCI slots

System BIOS

BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Management

Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Power Configurations ACPI / ACPM Power Management

PC Health Monitoring

CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator
FAN Total of six fan headers supporting up to 6 fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
Temperature Monitoring for CPU and chassis environment
Thermal Control for 6x fan connectors
PECI
Other Features Chassis intrusion detection
Chassis intrusion header

Operating Environment / Compliance

RoHS

RoHS Compliant 6/6, Pb Free
Environmental Spec. Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)