Popis produktu:

Key Features

1. Single socket H3 (LGA 1150) supports
    Intel® Xeon® E3-1200 v3, 4th gen.
    Core i3, Pentium, Celeron processors
2. Intel® C222 Express PCH
3. 8x 2.5" Hot-swap SAS2/SATA3
    HDD bays
4. Up to 32GB DDR3 ECC 1600MHz
    UDIMMs in 4 sockets
5. 1x PCI-E 3.0 x8 (in x16) Full-height slot
6. Dual Gigabit Ethernet LAN ports via
    Intel® i210AT
7. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
8. 330W Gold Level Power Supply
9. SATA Disk-on-module (DOM) power
    connector; TPM 1.2 and USB Type A

Product SKUs

SYS-1018D-73MTF SuperServer 1018D-73MTF (Black)

Motherboard


Super X10SL7-F

Processor/Cache

CPU Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
Socket H3 (LGA 1150)

System Memory

Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C222 Express PCH
SATA SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
SAS SAS2 (6Gbps) via LSI 2308
SW RAID 0, 1, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC with 10/100/1000Mbps
Network Controllers Intel® i210AT dual port GbE Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA Aspeed AST2400 BMC

Input / Output

SATA 2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
SATA DOM Power Connector
SAS 8x SAS2 (6Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 4x USB 2.0 ports
VGA 1x VGA port
Serial Port / Header 2x COM ports (1 rear, 1 header)

PC Health Monitoring

Voltage Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header

Chassis

Form Factor 1U Rackmount
Model CSE-113MTQ-330CB

Dimensions

Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 19.98" (507mm)
Weight Gross Weight: 30.4 lbs (13.8 kg)
Net Weight: 17.6 lbs (8 kg)
Available Colors Black

Front Panel

Buttons Power On/Off button
System Reset button
LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED

Expansion Slots

PCI-Express 1x PCI-E 3.0 x8 (in x16) Full-height slot

Drive Bays

Hot-swap 8x 2.5" Hot-swap SAS2/SATA3 HDD bays
Peripheral Bay Slim optical drive (optional)

Backplane

SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller)

System Cooling

Fans 3x 40x28mm 4-pin PWM Cooling Fans
Optional fans to cool add-on cards

Power Supply

330W AC power supply w/ PFC
AC Voltage 100-240 V, 50-60 Hz, 4.5 Amp max
+5V 18 Amp
+5V standby 3 Amp
+12V 27 Amp @ 100-180Vac,
31 Amp @ 180-240 Vac
-12V 0.5 Amp
+3.3V 15 Amp
Certification
   Gold Certified
  [ Test Report ]

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3

Management

Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

Operating Environment / Compliance

RoHS RoHS2 (2011/65/EU) Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)