Popis produktu:

Rackmount GPU/Xeon Phi Server:
2x GPU/Xeon Phi Cards Supported (Optional)

Key Features

1. Intel® Xeon® processor E5-2600
    family; QPI up to 8GT/s
2. Up to 768GB DDR3 1600MHz* ECC
    Registered DIMM; 24x DIMM sockets
    * Depends on memory configuration
3. 2x PCI-E 3.0 x16 slots
    (support 2x GPU/Xeon Phi cards, opt.),
    4x PCI-E 3.0 x8 slots
4. Intel® X540 Dual port 10GBase-T
5. I/O ports: 2x 10Gb LAN, 1x Dedicated
    LAN for IPMI Remote Management,
    1x VGA, 1x COM port, 2x USB 2.0
6. 8x 3.5" Hot-swap Drive Bays and
    2x 5.25" Peripheral Drive Bays
7. 4x middle fans & 2x rear exhaust fans
8. 1280W Redundant Power Supplies
    Platinum Level (94%)
9. Battery Backup Power
    (optional, PWS-1K03B-1R)

Product SKUs

SYS-6037R-72RFT+ SuperServer 6037R-72RFT+ (Black)

Motherboard


Super X9DR7-TF+

Processor/Cache

CPU Intel® Xeon® processor E5-2600 (up to 135W TDP *)
Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details
Cache Up to 20MB
System Bus QPI up to 8 GT/s
GPU/Xeon Phi Support M2050/M2070(Q), up to 135W CPU at 30°C
M2090, up to 135W CPU at 30°C
K10 (Kepler), up to 135W CPU at 35°C
K20 (Kepler), up to 135W CPU at 30°C
Xeon Phi, up to 135W CPU at 30°C

System Memory

Memory Capacity 24x 240-pin DDR3 DIMM sockets
Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets
Memory Type 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C602J Chipset
SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS SAS2 via LSI 2208
HW RAID 0, 1, 5, 6, 10, 50, 60 support
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Nuvoton W83527HG

Input / Output

Serial ATA 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SAS 8x SAS2 ports (6Gbps)
LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A)
VGA 1x VGA port
Serial Port / Header 2x Fast UART 16550 ports: 1 rear and 1 header

Chassis

Form Factor 3U Rackmount
Model CSE-835BTQ-R1K28B

Dimensions

Width 17.2" (437mm)
Height 5.2" (132mm)
Depth 25.5" (648mm)
Weight Gross: 74.8lbs (34kg) / Net: 48lbs (21.8kg)
Available Colors Black

Front Panel

Buttons Power On/Off button
System Reset button
LEDs Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED

Expansion Slots

PCI-Express 2x PCI-E 3.0 x16 Full-height Full-length (support 2x GPU/Xeon Phi cards)
4x PCI-E 3.0 x8 slots
Without GPU installed, can support 5x Full-height Full-length, and 1x half length PCI-E card
With 2x GPU installed, can support 1x Full-height Full-length and 1x Half-length PCI-E cards (both CPUs need to be installed for full access to PCI-E slots. See manual for details)

Drive Bays

Hot-swap 8x 3.5" Hot-swap SAS/SATA HDD trays
SAS or enterprise SATA HDD only recommended
Peripheral Bays 2x 5.25" Peripheral Drive Bay

Backplane

1x SAS2 / SATA backplane

System Cooling

Fans 4x 8cm 9.5K RPM, Middle fans
2x 8cm 6.7K RPM, Rear Exhaust fan

Power Supply

1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
   Platinum Certified
 [ Test Report ]

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI

Operating Environment / Compliance

RoHS RoHS Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)